3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Compressor Seals will require re-build

Compressor Seals will require re-build after 200-240hrs of operation

Unique Catch Port Design: An additional length of hose can be installed at the port inside the tank to facilitate accurate collection of resin

Cloudy or dark oil should be changed

570" Bead Center 6

***Note: Tank comes empty and does not include solvent

3/8" 37 Degree JIC Adapter for TRS21 Recovery Pump - Pair 1.5inch Compressor Seals will require re-buildIncludes a Pair of Custom 3 8" 37 degree JIC fittings that adapt on to any TRS21 pump. (Does not include Pump) ***Note: This Adapter SHOULD NOT BE OVERTIGHTENED. Hand Tight with 1 4 Wrench turn will complete the face seal of the O ring. (PTFE Thread Tape is NOT Required for this connection) ***Note: Always use 2 Wrenches while tightening the hose to the flare to stop the gasket from being crushed.