8" Loose Section Buff Arbor Hole Size:1" All surfaces on a Round

All surfaces on a Round End Goblet Buff usable

Originally this type of panel holder was developed in the late 1920's for holding aircraft skin in place for riveting

TAPER LH 1/2"  SMOOTH BORE

Thanks for understanding

Designed to be used specifically with the 1 HP and 1 1/2 HP Baldor Buffers

8" Loose Section Buff Arbor Hole Size:1" All surfaces on a RoundSuper flexible buff for moderate cutting and good coloring action in hard to reach surfaces. Usually used with the White Compounds for final bright polishing. It is also used for cutting with Emery or Tripoli when a Spiral Sewn is too stiff and flexibility is needed. Made from 100% cotton muslin. 60 X 60 cloth, 40 ply. Safety first Always wear adequate & proper EYE, EAR, FACE, BODY and RESPIRATORY PROTECTION while polishing and buffing. Made in the USA