Team Associated - B6 Rear Shock Tower (Long) Gmade Replaces the stock plastic bulkhead

Replaces the stock plastic bulkhead

Loosen the cap a half turn put the shock shaft in to pump out the excessive amount of oil Tips Make sure oil are fill to the top with no air in the oil and when Screw down the cap the shock shaft should be about 3 to 4mm out

- Replace lock nut as needed

Operating on a wide voltage range of 4

Front Portal Gear Set

Team Associated - B6 Rear Shock Tower (Long) Gmade Replaces the stock plastic bulkheadThis optional tall rear shock tower allows your RC10B6 and RC10B6D to accommodate longer, higher capacity 31mm shocks (the same shocks that come on the B5 series) for better compliance on very bumpy or loose tracks.