Dash Cam Power Tap-In Loom for Overhead Console for Land Rover Discovery Sport L550 alloy wheel nuts There are couple of part

There are couple of part numbers used on the Discovery Sport models depending on chassis number (see picture) - please check before ordering which part number you require

These tips take your exhausts from around 70mm to approx 83mm overall diameter

position clean the area of the headlight where the tape will stick with supplied cleaning wipe ( to remove dirt / polish etc )

You can then simply flip the template back down and fit the new lettering - this way you'll ensure correct positioning and spacing

We have a series of youtube videos showing how to strip down the front of the car - it is pretty simple - see below

Dash Cam Power Tap-In Loom for Overhead Console for Land Rover Discovery Sport L550 alloy wheel nuts There are couple of partPower Tap in Loom for Overhead Console for Land Rover Discovery Sport L550 This listing is for a power tap in loom for the Land Rover Discovery Sport. This custom made loom simply plugs into the front overhead console and gives you 3 power take off wires that you can use to install an accessory of your choice, dashcam etc: Ignition positive 12 Volts (Green wire) this comes live when you open the door. Permanent battery positive 12 volts (Red wire)